Products

/Products

Our online catalogue has been designed to try and cover every clutch variant to enable a choice to be made for your application. However we understand that sometimes you may not have all the information to allow you to make an online purchase so welcome the opportunity to discuss your requirements. Alternatively please check our Brand Specialists who are our trusted partners in specific vehicle Brands who will be able to guide you to the correct choice. Our Brand Specialists have first hand experience of PTT products through day in day out use.

View cart “Radiused 42mm Bearing” has been added to your cart.
  • Medium size decal
  • SF Technic Sunstrip

    £9.95 £11.94 Inc VAT
    Available to customers is our SF Technic branded Sunstrip, a very useful addition to any competition car where the driver is sitting low and sun glare is a problem. We have decided to subsidise this product as........ put simply we appreciate your support to display our logo with pride.
  • Our high quality Alignment Tool is made from Hard Anodised Aluminium and available in the most popular spline sizes (please contact us if yours is not listed). This tool makes aligning a multi disc clutch a straight forward task. 15mm spigot as standard.
  • Radiused 42mm Bearing

    £58.00 £69.60 Inc VAT
    Competition Release Bearing - 40mm I.D The 42mm Fulcrum point of this bearing optimises the longer release fingers of the PTT Clutch range, therefore reducing the force required to disengage the Clutch, subsequently putting less stress on the engines crank thrust bearing. Recommended for all applications where the release mechanism allows for a 40mm bearing.
  • 7.25″ (184mm) Floater Plate

    £80.00 £96.00 Inc VAT

    Replacement 7.25" (184mm) Floater Plate for PTT and Super Clutch units. 

    This is the most common Standard version, however we can also offer Lightweight and Super Lightweight versions - please contact us for more details.  

  • Replacement 7.25" (184mm) Clutch Disc Pack - Bronze Metallic Material, suitable for all PTT and Super Clutch units of this size and friction material type. Select your required number of discs, thickness, spline type and hub set. Wear limits are found within our Data Sheets - Click Here   Please contact us if you require replacement Organic Friction material disc packs.
  • 7.25″ (184mm) Organic Clutch Pack

    £81.00£443.00

    Available on backorder

    Replacement 7.25" (184mm) Clutch Disc Pack - Organic Material, suitable for all PTT and Super Clutch units of this size and friction material type. Select your required number of discs, thickness, spline type and hub set. Wear limits are found within our Data Sheets - Click Here  

  • Replacement 7.25" (184mm) Pressure Plate for PTT and Super Clutch units. The standard P/Plate has a fulcrum diameter of 6.2", this is the diameter measured across the "bump" points. The High Ratio P/Plate has a fulcrum of 6.0", this is the diameter measured across the "bump" point. The High Mass P/Plate has a fulcrum of 6.2" (Same as Standard P/Plate) however the I.D of the part is smaller to increase the available mass of the part.
  • 10.4" Street Stock Aluminium Core Clutch Disc

  • The Omega pot type pistons are extremely high quality and SBD have used them since they first started. The piston crown has been developed over time to what we believe is the best pot type piston available, in fact when tested against other makes of piston, they regularly out perform even those types which are supposed to be a slipper style. If you have a reasonable budget which is not able to stretch to our high specification Omega slipper pistons, choosing our Omega Pot type piston is an essential way to gain performance and reliability at the right price.
    Available in 87.50mm and 88.00mm bore.
  • 7.25″ (184mm) Racing Clutch

    £458.50£918.00

    Available on backorder

    The PowerTrain Technology 7.25" (184mm) Competition Clutch is available from 1 Disc to 4 Disc, with a choice of material thickness, spring rate and hub selection (depending on application).   Select not sure on any option below for our experts to review and advise accordingly.
  • 10.4″ Street Stock Clutch Cover

    £465.00 £558.00 Inc VAT

    Available on backorder

    10.4" Street Stock Clutch Cover - Aluminium Type

  • 2.0L XE Omega/SBD 87.00mm Pot Piston set.
    The Omega pot type pistons are extremely high quality and SBD have used them since the company was founded. The piston crown has been developed over time to what we believe is the best pot type piston available, in fact in many cases when put up against other makes of piston, they regularly out perform even those types which are supposed to be a slipper type. If you have a reasonable budget which is not able to stretch to our high specification Omega slipper pistons, choosing our Omega Pot type piston is an essential way to gain performance and reliability at the right price. Suitable for use with either standard rods or our 143mm Saenz Steel Rod Set.
  • 5.50″ (140mm) Racing Clutch

    £510.00£997.00

    Available on backorder

    The PowerTrain Technology 5.5" (140mm) Competition Clutch is available from 1 Disc to 4 Disc, with a choice of material thickness, spring rate and hub selection (depending on application).   Select not sure on any option below for our experts to review and advise accordingly.
  • 4.50″ (114mm) Racing Clutch

    £645.00£1,075.00
    Please contact us directly for all 4.50" (114mm) Clutch enquiries due to the specialised nature of this product range.
  • When using slipper pistons there are a lot of stories around, but most of these tales have come from using inferior products.
    SBD have used Omega slipper pistons for many years now and find they are, in fact, more reliable and create less wear than any other design of piston, whether used in rally, race, sprint or hillclimb engines.
    When you wish to produce the ultimate engine, the Omega slipper piston would always be our first choice.
    SBD have taken all the latest advancements in technology and together with the improvements they have discovered from their engine developments used this to design a completely new piston for the ever popular 2.0L XE. Omega have produced a completely optimised forging, it has significantly increased strength over any piston SBD have produced in the past and great care has been taken to ensure no machining is required to the internal structure in order to maintain maximum strength.
    SBD have reduced the pin size from the previous slipper design of 20mm down to 18mm (STD is 21mm), and then been able to reduce the piston pocket depth due to their advanced cam designs, this has allowed SBD to reduce piston crown height to improve flame travel within the combustion area and yet still maintain optimum compression.
    Piston weights as follows (including rings, pin and circlips);
    86mm - 298g
    87mm - 307g
    88mm - 314g