Products – Page 3 – SF Technic. U.K. and European distributors for PowerTrain Technology

CA-EK-RL

£330.00 £396.00 Inc VAT

Description

PART# CA-EK-RL APPLICATION: 96-2000 Honda Civic Replacing the factory rubber bushing rear lower control arm with the Pro Car Innovations Spherical bearing rear lower control arm effectively helps eliminate issues like sloppy inconsistent handling, alignment changes, rear drift under braking. One of the main features of our arm and most important fix or upgrade to any track car is our shock mounting location design that uses a bronze plain bearing which 100% eliminates all rotational deflection caused from heavier after market sway bars. With our design the rear sway bar will load up instantly with any body roll making the sway bar far more effective. BENEFITS:

Bronze bearing shock mount will eliminate 100% of rotational deflection from heavy sway bars
Allows for more precise suspension adjustments
Helps eliminate wheel alignment changes
Helps eliminate suspension deflection seen with rubber or urethane bushings
Long lasting maintenance free 4130 steel spherical bearings
Extremely resistant to all harsh weather, street and racing conditions
Low cost Fully re-buildable
M10X1.25 THREADED SWAY BAR MOUNTING HOLES

SPECS: 6061 T6 ALUMINUM ARM 304 STAINLESS STEEL SPACERS CUSTOM SPEC PCI 5/8″ COM10SST FULL STAINLESS (as of 7-10-2020) SPHERICAL BEARINGS

Add to cart Details

10.4″ Street Stock Clutch Disc

£325.00

10.4" Street Stock Aluminium Core Clutch Disc

Select options Details

CA-RSX-RU (02-06 RSX 01-05 CIVIC adjustable rear upper camber arm)

£305.00 £366.00 Inc VAT

Description

PRODUCT UPDATE AS OF 10-25-21. WE ADDED A CAM BOLT ADJUSTER TO THE ADJUSTMENT SLOTS FOR EASY CAMBER AJUSTMENTS AND WILL ALSO PREVENT ANY SLIPPING. THE ARMS WILL ALSO BE IN OUR NEW GLOSS METALLIC BLACK. Application: 02-06 RSX 01-05 CIVIC FEATURES:

CNC LASER CUT STEEL BRACKETS
CNC MACHINED HIGH MISALIGNMENT STAINLESS STEEL SPACERS
HIGH QUALITY SPHERICAL ROD ENDS
POWDER COATED

BENEFITS:

3″ LONGER ARM THAN FACTORY FOR IMPROVED ROLL CENTER MOVEMNT DURING BUMP
REDUCES UNDERSTEER AND IMPROVES ROTATION DUE TO LESS ROLL CENTER DROP DURING CORNERING/BODY ROLL
ALLOWS FOR MORE PRECISE SUSPENSION ADJUSTMENTS
REDUCES WHEEL ALIGNMENT CHANGES
ELIMINATES UNWANTED SUSPENSION DEFLECTION
LONG LASTING MAINTENANCE FREE
FULLY REBUILDABLE

Add to cart Details

Rear Upper Camber Link – Race Spec (’88-’91 CRX, ’88-’00 Civic, ’89-’01 Integra)

£265.00 £318.00 Inc VAT

Description: Rear upper suspension link allows for more precise suspension tuning. Provides adjustable camber of 2.5 degrees, positive or negative. Features:

CNC machined 7075 T6 hex Aluminum turnbuckles for increased thread strength.
CNC machined stainless steel spacers and shaft.
3 piece precision 4130 steel rod ends
Anodized and laser etched logo.

Benefits:

Adjustable camber (+/- 2.5*) over OEM
Improves even tire wear and temps.
Reduces wheel alignment changes
Eliminates unwanted suspension deflection
Long lasting and maintenance free rod ends
Fully rebuildable

Will fit:

‘88-’91 CRX
’88-’00 Civic
’89-’01 Integra

MSRP $230 Part# CA-DC2-RU

Add to cart Details

7.25″ (184mm) Replacement Pressure Plate

£214.00

Replacement 7.25" (184mm) Pressure Plate for PTT and Super Clutch units. The standard P/Plate has a fulcrum diameter of 6.2", this is the diameter measured across the "bump" points. The High Ratio P/Plate has a fulcrum of 6.0", this is the diameter measured across the "bump" point. The High Mass P/Plate has a fulcrum of 6.2" (Same as Standard P/Plate) however the I.D of the part is smaller to increase the available mass of the part.

Select options Details

7.25″ (184mm) Floater Plate

£89.00 £106.80 Inc VAT

Replacement 7.25" (184mm) Floater Plate for PTT and Super Clutch units.

This is the most common Standard version, however we can also offer Lightweight and Super Lightweight versions - please contact us for more details.

Add to cart Details

Radiused 42mm Bearing

£64.00 £76.80 Inc VAT

Competition Release Bearing - 40mm I.D The 42mm Fulcrum point of this bearing optimises the longer release fingers of the PTT Clutch range, therefore reducing the force required to disengage the Clutch, subsequently putting less stress on the engines crank thrust bearing. Recommended for all applications where the release mechanism allows for a 40mm bearing.

Add to cart Details

Alignment Tool

£58.00

Our high quality Alignment Tool is made from Hard Anodised Aluminium and available in the most popular spline sizes (please contact us if yours is not listed). This tool makes aligning a multi disc clutch a straight forward task. 15mm spigot as standard.

Select options Details

Hydro-Max Rebuild Kit

£22.50 £27.00 Inc VAT

Please note, this is for a rebuild kit (only) to suit the PTT Hydro-Max Slave Cylinder/Bearing.

Add to cart Details

SF Technic Sunstrip

£9.95 £11.94 Inc VAT

Available to customers is our SF Technic branded Sunstrip, a very useful addition to any competition car where the driver is sitting low and sun glare is a problem. We have decided to subsidise this product as........ put simply we appreciate your support to display our logo with pride.

Add to cart Details

SF Technic Decal – 03

£0.00

Medium size decal

Select options Details