-
Replacement 7.25" (184mm) Clutch Disc Pack - Bronze Metallic Material, suitable for all PTT and Super Clutch units of this size and friction material type. Select your required number of discs, thickness, spline type and hub set. Wear limits are found within our Data Sheets - Click Here Please contact us if you require replacement Organic Friction material disc packs. -
Available to customers is our SF Technic branded Sunstrip, a very useful addition to any competition car where the driver is sitting low and sun glare is a problem. We have decided to subsidise this product as........ put simply we appreciate your support to display our logo with pride. -
Medium size decal -
This is our Ginetta G55 direct replacement clutch, swap out the factory option on any cars which no longer have to run the original part. This clutch spec is tailored to the requirements of front running G55's and as per all of our products, we never compromise on quality. 7.25" (184mm) Twin Disc Clutch utilising .250" (6.35mm) thick friction discs with a high ratio pressure plate for increased clamp load and torque capacity while maintaining low release loads. 1" x 23 spline hubs. -
Our 5.5" (140mm) Twin Disc .105" Spec Clutch is a perfect solution to the factory clutch as fitted to the majority of Opel Powered Dallara F3 cars. Direct replacement for AP part number CP6002-OH90-SF with CP3414 discs This PTT unit provides, in our opinion improved clutch feel and usability combined with extended service life and is provided at an affordable price. Our standard F3 Specific Spec utilises .105" thick friction discs, however this can be upgraded to .200" for increased longevity (surcharge applies) where required. Please note that the slave cylinder height will need to be re-set if the thicker discs are used. 7/8" x 20 spline is standard to suit Hewland gearboxes, however alternative spline types can be catered for, please contact us for further information. -
The SF Technic Mk6 Fiesta Front Brake Kit has been engineered to fit under 15" wheels for Race or Rally applications where high braking forces are required, therefore we have incorporated the Alcon B Type caliper into our kit. 295mm diameter discs mounted to bespoke aluminium brake bells with integral wheel spacers and centre spigot to aid wheel fitment. Please contact us for further information and wheel fitment options. Note: This brake kit in most cases is made to order, therefore allow a 6-8 week lead time from date of payment. -
Our high quality Alignment Tool is made from Hard Anodised Aluminium and available in the most popular spline sizes (please contact us if yours is not listed). This tool makes aligning a multi disc clutch a straight forward task. 15mm spigot as standard. -
Competition Release Bearing - 40mm I.D The 42mm Fulcrum point of this bearing optimises the longer release fingers of the PTT Clutch range, therefore reducing the force required to disengage the Clutch, subsequently putting less stress on the engines crank thrust bearing. Recommended for all applications where the release mechanism allows for a 40mm bearing. -
The PowerTrain Technology 7.25" (184mm) Competition Clutch is available from 1 Disc to 4 Disc, with a choice of material thickness, spring rate and hub selection (depending on application). Select not sure on any option below for our experts to review and advise accordingly. -
The PowerTrain Technology 5.5" (140mm) Competition Clutch is available from 1 Disc to 4 Disc, with a choice of material thickness, spring rate and hub selection (depending on application). Select not sure on any option below for our experts to review and advise accordingly. -
Please contact us directly for all 4.50" (114mm) Clutch enquiries due to the specialised nature of this product range.
